Dell Latitude 3320 Service Manual page 70

Hide thumbs Also See for Latitude 3320:
Table of Contents

Advertisement

Table 16. System setup options—Pre-boot Behavior menu (continued)
Pre-boot Behavior
Table 17. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
VT for Direct I/O
Intel Trusted Execution Technology
(TXT)
Enable Intel Trusted Execution
Technology (TXT)
Table 18. System setup options—Performance menu
Performance
Multi Core Support
Active Cores
Intel SpeedStep
Enable Intel SpeedStep Technology
C-States Control
Enable C-State Control
Intel Turbo Boost Technology
Enable Intel Turbo Boost Technology
Intel Hyper-Threading Technology
Enable Intel Hyper-Threading Technology
70
System setup
By default, the 0 seconds option is enabled.
When enabled, the system will be able to run a Virtual Machine Monitor
(VMM).
By default, the option is enabled.
When enabled, the system will be able to perform Virtualization Technology for
Direct I/O (VT-d).
By default, the option is enabled.
Specifies whether a measured Virtual Machine Monitor (MVMM) can use the
additional hardware capabilities that are provided by Intel Trusted Execution
Technology. The following must be enabled in order to enable Intel TXT.
● Trusted Platform Module (TPM)
● Intel Hyper-Threading
● All CPU cores (Multi-Core Support)
● Intel Virtualization Technology
● Intel VT for Direct I/O
By default, the option is disabled.
Enables to change the number of CPU cores available to the operating system.
By default, the All Cores option is enabled.
Enables the system to dynamically adjust processor voltage and core
frequency, decreasing average power consumption and heat production.
By default, the option is enabled.
Enable the ability of the CPU to enter and exit low power state. When disabled,
it disabled all C-states. When enabled, it enabled all C-states that the chipset
or platform allows.
By default, the option is enabled.
Enable or disable the Intel TurboBoost mode of the processor.
By default, the option is enabled.
Enable or disable Hyper-Threading in the processor.
By default, the option is enabled.

Advertisement

Table of Contents
loading

Table of Contents