Blaupunkt Phoenix MP33 Operating And Installation Instructions page 9

Storing the station names
You can assign a name to each radio station and store it in
memory. As much as 30 station names can be stored com-
posed with 8 characters each.
Storing the station names
1.
Tune in a station whose name you want to store.
2.
Press the for more than 2 seconds.
DISP
The "EDIT" will light then the "_ _ _ _ _ _ _ _" on the
display window. The first " _ " flashes.
3.
Enter the characters.
A. Rotate the VOL dial in a clockwise direction to select
the desired characters.
< > ∗ +
( A ➜ B ➜ C ➜ . . . Z ➜ ➜ ➜ ➜ ➜
➜0➜1➜2➜3...9➜" "Space )
B. Rotate the TUN/TRK dial to move the flashing cur-
sor.
C. Repeat steps A. and B. to complete entering the en-
tire name 8 characters max.
Tips
• To erase/correct a name, press the for more than 2
DISP
seconds to clear the character and re-enter.
• If you make no button input or dial operation in 30 sec-
onds, the message edit mode will turn off automatically.
• If you try to store more than 30 station names, "**FULL**"
will be displayed.
• When entering a name, pressing the following buttons af-
fects the display of characters as follows.
: Changes to inputting letters. (Starts with " A ".)
1
: Changes to inputting numbers. (Starts with "
2
: Changes to inputting characters. (Starts with "
3
: Enters a space (blank).
6
4.
Press the to store the station name.
SC/PS
The station name flashes.
5.
To return to the normal radio reception, Press
E-8
phnx33_body 8
Direct Access to Memorized Stations via ST-
CALL
You can search for the memorized AM & FM station names in
the memory.
1.
Press the to display the "ST-CALL" on the display
DISP
window.
2.
Rotate the VOL dial to select the desired station name.
3.
Press the to tune in the desired station.
SC/PS
Erasing the station names
1.
Tune in any station and press the
seconds.
− . /
➜ ➜ ➜
2.
'
Press the .
SC/PS
The station name or " _ _ _ _ _ _ _ _ " flashing.
3.
Rotate the VOL dial to select the name of the station that
you want to erase. To erase all the names of the stations,
display " ALL DEL ".
4.
Press the , then press the
SC/PS
seconds.
Repeat steps 3. and 4. if you want to erase other names.
5.
To return to the normal radio reception, Press
0
".)
<
".)
DISP .
DISP for more than 2
for more than 2
DISP
.
DISP
03/4/22, 17:37