Blaupunkt Phoenix MP33 Operating And Installation Instructions page 5

Tips
• EQ disp *
Displays the current setting of equalizer curve, if the equal-
izer has been set.
(See " Setting the equalizer ")
bAS
• X-BASS
For enhanced bass centered @ 72 Hz, Blaupunkt's X-BASS
function can be set for either each band and CD mode.
Reduce X-BASS level if your combination of speakers and
add on amplifires sound distorted at the preferred sound
level.
LMt
• LEVEL (Limit volume)
Adjust the volume at the time of power on. You can adjust
with the actual sound.
• MUt LEVEL (Mute level)
You can adjust the mute level with the actual sound.
• Settings for BASS, TREBLE, LOUDNESS and X-BASS can be
made to each of the following modes independently:
FM/AM/CD
E-4
phnx33_body 4
Setting the equalizer
You can select an equalizer curve for 4 music types (Rock,
Pop, Classic, Jazz).
Selecting the equalizer curve
1.
Press the AUDIO to select the BAS/TRE/LOUD or X-BASS
adjustment mode.
2.
Press the preset button ~ to select the desired
1 6/
equalizer curve. " " will light on the display window.
• ROCK
1
• POP
2
• CLASSIC
3
• 4/MIX JAZZ
• USER 1
5/RPT
• USER 2
6/
Adjusting the equalizer curve
You can store and adjust the equalizer settings for frequency
and level.
1.
Press the to select the BAS/TRE adjustment mode.
AUDIO
2.
Adjust the desired sound characteristics with BAS/TRE/
LOUD/X-BASS.
3.
Press the or for more than 2 seconds to store
5/RPT 6/
the equalizer curve.
• USER 1
5/RPT
• USER 2
6/
Cancelling the equalizer curve
1.
Press the to display the current equalizer curve/
AUDIO
2.
Press the while the name of equalizer curve
MUTE / SENS
blinking to cancel the equalizer curve.
The "EQ OFF" will blinking for few seconds.
Setting the sound stage
You can select/adjust the position of sound stage to best serve
a particular seat.
Selecting the sound stage
1.
Press the to select the BAL/FAD adjustment mode.
AUDIO
2.
Press the preset button ~
1 6/
sound stage as follows.
• POS 1 (For the left seat)
1
• POS 2 (For the front seat)
2
• POS 3 (For the right seat)
3
• POS 4 (For the rear seat)
4/MIX
• POS 5 (For all the seat)
5/RPT
• POS 6 (For all the seat)
6/
Adjusting the sound stage
1.
Press the AUDIO to select the BAL/FAD adjustment mode.
2.
Adjust the desired sound stage.
3.
Press the desired preset button
2 seconds to store the desired sound stage.
03/4/22, 17:37
to select the desired
B R2 F R4
B 0 F R4
B L2 F R4
B 0 F F4
B 0 F 0
B 0 F 0
~ for more than
1 6/