Automatic Access Outside Line Group Assignment - Panasonic KX-TD816 Programming Manual

2.2 System Programming

[103]Automatic Access Outside Line Group Assignment

Description
Assigns the sequence in which outside line groups will be accessed when in Automatic Line
Access mode. When a user dials the feature number for automatic line access (default=9) or
presses the Loop-CO button, an idle line is searched for in the programmed outside line group
order.
Selection
Outside line group number: 1 through 8 in desired order
Default
12345678
Programming
1.
Enter 103.
Display: Local Access
2.
Press NEXT.
Display example: Access:12345678
3.
Enter the outside line group numbers in priority from top to bottom.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new order
4.
Press STORE.
5.
Press END.
Conditions
• The system supports a maximum of eight outside line groups.
• Automatic Line Access feature works only if the Automatic Route Selection mode is turned
off in programme
Features Guide References
Line Preference – Outgoing (Idle Line / No Line / Prime Line)
Outside Line Access
60
[312]ARS Mode.
General Programming