Disa Dtmf Repeat - Panasonic KX-TD816 Programming Manual
Digital super hybrid system
Hide thumbs
Also See for KX-TD816:
- Installation manual (502 pages) ,
- Programming manual (443 pages) ,
- User manual (388 pages)
Table of Contents
Advertisement
2.8 Resource Programming
[812] D ISA DTMF Repeat
Description
Selects whether the system transmits DTMF (Dual Tone Multi-Frequency) signals directly to
the central office (CO) or if the system repeats the DTMF signals to CO in order to adjust gain.
This can be done for an outside-to-outside line call via the Direct Inward System Access
(DISA) feature during dialling and / or during an established call.
Selection
• Dial (during dialling) / Call (during an established call)
• Mode: Repeat / Through
Default
Dial and Call – Repeat
Programming
1.
Enter 812.
Display: DISA DTMF Repeat
2.
Press NEXT to programme the mode during dialling.
To programme the mode during an established call, press NEXT again.
Display example: Dial:Repeat
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press NEXT to programme the mode during an established call.
Display example: Call:Repeat
6.
Keep pressing SELECT until the desired selection is displayed.
7.
Press STORE.
8.
Press END.
Conditions
None
Features Guide References
Direct Inward System Access (DISA)
206
General Programming
Advertisement
Table of Contents
