2.6 COS Programming
[506] E xecutive Busy Override Deny
Description
This programme is used to determine which Classes of Services (COS) are allowed to den
Executive Busy Override. Executive Busy Override Deny allows the user to prevent Executive
Busy Override from being executed by another extension user.
Selection
• COS number: 1 through 8,
• Disable / Enable
Default
All COS – Enable
Programming
1.
Enter 506.
Display: Busy Over. Deny
2.
Press NEXT.
Display: COS NO?
3.
Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Enable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another COS, press NEXT or PREV, or SELECT and the desired COS
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all COS to one selection, press the
the contents programmed for COS 1.
Features Guide References
Executive Busy Override
168
( =all COS)
key in step 3. In this case, the display shows
General Programming