Programming Example - Panasonic KX-TD816 Programming Manual

1.6 Programming Example

Programming Example
The following programming instructions assume that you have already entered the
programming mode and that you will employ method (b) of "Going to another programme
address" in Section 1.3 P rogramming Methods.
Example: programme [001] S ystem Speed Dialling Number Set
Sample of Description
[001] (1)
System Speed Dialling Number Set
(3)
Description
Used to program the System Speed Dial numbers.
These numbers are available to all extension
users. There are 500 numbers from 000 through
499.
(4)
Selection
•
Speed dial number: 000 through 499
•
Telephone number: 24 digits (max.)
(5)
Default
All speed dial numbers – Not stored
(6)
Programming
1. Enter 001.
Display: SPD Number Set
2. Press NEXT.
Display: SPD Code?→
3. Enter a speed dial number.
To enter speed dial number 000,
you can also press NEXT.
Display example: 000:Not Stored
4. Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press
CLEAR and enter the new number.
5. Press STORE.
Programming Instructions
(7)
(8)
(9)
(10)
(12)
(14)
(2)
(1) Programme address.
(2) Programme title.
(3) Provides a more detailed description of the
programme.
(4) Shows you choices that you can assign.
(5) Shows you the default (factory setting).
(6) Shows you programming procedures step by step.
• While programming, use the overlay.
• Before starting to programme, enter the
programming mode. (See Entering the
programming mode in Section 1.2 Using
Proprietary Telephones.)
(7) Enter the programme address.
(8) The display shows the programme title. If your
telephone has soft buttons, the lower line shows
the functions that are currently assigned to them.
(9) Press either Soft 3 (NEXT)shown on the display
or the NEXT shown on the overlay.
(10) The message line advises you to enter a speed dial
number.
(11) If the telephone number has already been stored,
(11)
the number is displayed.
(12) Enter the telephone number that you want to store.
(13)
Your entry is displayed as you enter the digits.
(13) Pressing CLEAR erases the whole entry.
(14) Your entry is now stored.
The indicator lights red and a confirmation tone
lets you know that storage is completed.
1.6 Programming Example
Explanation
23