Smdr Output Mode - Panasonic KX-TD816 Programming Manual

2.8 Resource Programming
[815] S MDR Output Mode
Description
Assigns the SMDR Output Mode. There are two standards available – Regular and Charge.
Selection
Regular / Charge
Default
Regular
Programming
1.
Enter 815.
Display: SMDR Output Mode
2.
Press NEXT.
Display example: SMDR:Regular
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
• Select the Output Mode used by your SMDR.
• If you assign for Charge, you can select the display in Meter / in Charge through programme
[12 0]Charge Display Selection.
Features Guide References
Station Message Detail Recording (SMDR)
210 General Programming