[612] Incoming Call Display
Description
Allows you to choose between three display types when an incoming call is received.
Calling: The incoming caller's telephone number is displayed.
Called: The called telephone number is displayed.
Line Name: The outside line name assigned in the program me [417]Outside Line Name
Assignment is displayed.
Selection
• Jack number:
KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all jacks)
• Display Types: Calling / Called / CO Line Nam
Default
All jacks – Calling
Programming
1.
Enter 612.
Display: Incoming Display
2.
Press NEXT.
Display: Jack NO?
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Calling
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another jack, press NEXT or PREV, or SELECT and the desired jack
numbe .
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master System and 33 through
64 are for the Slave, if available.
• To assign all jacks to one selection, press the
the contents programmed for jack 01.
General Programming
2.7 Extension Programming
key in step 3. In this case, the display shows
187