[41 2]Pause Time - Panasonic KX-TD816 Programming Manual

2.5 Outside Line Programming
[412]Pause Time
Description
Assigns the length of the pause time. The programmed pause time is automatically inserted
after a line access number or a host PBX access code programme d in [411]Host PBX Access
Codes or manually inserted if the PAUSE button is pressed by the user.
Selection
• Outside line group (TRG) number:1 through 8, ( =all outside line groups)
• Time (seconds): 1.5 / 2.5 / 3.5 / 4.5
Default
All outside line groups – 4.5 s
Programming
1.
Enter 412.
Display: TRG Pause Time
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group number
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:4.5sec
4.
Keep pressing SELECT until the desired time is displayed.
5.
Press STORE.
6.
To programme another outside line group, press NEXT or PREV, or SELECT and the
desired outside line group number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• To assign all outside line groups to one selection, press the key in step 3. In this case, the
display shows the contents programmed for outside line group 1.
• Programme [ 401]Outside Line Group Assignment is used to assign each outside line to
an outside line group.
Features Guide References
Host PBX Access
Pause Insertion, Automatic
152 General Programming