Tie Security Type - Panasonic KX-TD816 Programming Manual

[440] TIE Security Type

Description
Assigns the security mode for TIE calls. There are two modes, Non Security and Trunk
Security (Outside line security). Non Security mode allows the caller to access an outside line
without dialling a TIE user code. Trunk Security mode requires the caller to enter a TIE User
Code assigned in programme [811] D ISA / TIE User Codes before making a TIE call.
Selection
• Outside line group (TRG) number: 1 through 8, ( =all outside line groups)
• Non (Non security) / Trunk (Outside line security)
Default
All outside line groups – Trunk
Programming
1.
Enter 440.
Display: TIE Security
2.
Press NEXT.
Display: TRK GRP NO?
3.
Enter an outside line group numbe .
To enter outside line group number 1, you can also press NEXT.
Display example: TRG1:Trunk
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
Press END.
Conditions
To assign all outside line groups to the same selection, press the
the display shows the contents programmed for outside line group number 1.
Features Guide References
E&M (TIE) Line Service
E & M Programming
4.4 TIE Line Programming
key in step 3. In this case,
323