[101] Day / Night Service Switching Mode
Description
This programme is used to determine if night mode is set automatically or manually.
Selection
Manual / Auto (automatic)
Default
Manual
Programming
1.
Enter 101.
Display: Day/Night Mode
2.
Press NEXT.
Display example: D/N Mode:Manual
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press END.
Conditions
• If automatic switching is assigned, day / night mode is switched at the time programmed in
[10 2]Day / Night Service Starting Time.
• The operator can switch the day / night mode at any time.
Features Guide References
Night Service
General Programming
2.2 System Programming
57