2.5 Outside Line Programming
[417] O utside Line Name Assignment
Description
Assigns company or customer names to each outside line so that the operator or extension user
can view the destination which the caller is trying to reach before answering.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 54,
( =all outside lines)
• Name: 10 characters (max.)
Default
All outside lines – Not stored
Programming
1.
Enter 417.
Display: CO Line Name
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4.
Enter a name.
For entering characters, see Section 1.4 Entering Characters.
To delete the current entry, press CLEA .
To change the current entry, press CLEAR and enter the new name.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• Outside lines 25 through 54 become available when the KX-TD290 expansion unit is
installed in the KX-TD1232.
156
General Programming