2.8 Resource Programming
[802] S ystem Data Printou
Description
Starts or stops printing the system data. All the current system-programmed data is printed out.
Selection
Start / Stop
Default
Not applicable.
Programming
1.
Enter 802.
Display: System Data Dump
2.
Press NEXT.
Display: Print-out:Start
3.
Press STORE to start printing.
Printing starts. To stop printing, press SELECT and go to step 4.
When printing is completed, the display shows:
Display: Print-Out:Finish
4.
Press STORE.
Display: Print-Out:Stop
5.
Press END.
Conditions
• It is necessary to connect a printer to the Serial Interface (RS-232C) port provided on the
system.
• You may stop printing by pressing the END button while records are being printed out.
• You cannot restart the printout while records are being output.
Features Guide References
Station Message Detail Recording (SMDR)
194
General Programming