Component Identification - Graco PerformAA 15 Instructions - Parts Manual

Component Identification

Component Identification
8
8b
8a
7
9
14
22
F . 1: PerformAA 50 with fluid swivel
IG
8
8b
8a
7
9
14
15
F . 2: PerformAA 15 without fluid swivel
IG
8
21g
Trigger Lock (3)
Spray Tip (7)
3
Air Cap Assembly (8)
16
Air Cap (8a)
Retaining Ring (8b)
21g
Trigger (9)
Inline Fluid Filter (14) Provides final fluid filtration.
Fluid Inlet Fitting (15)
3
Gun Air Inlet (16)
16
Fan Adjustment Knob
(21g)
Fluid Swivel
Connector (22)
Part
Locks the trigger (9) to
prevent the gun from
spraying.
Atomizes the fluid and
shapes the pattern width.
See Spray Tip Charts,
page 50.
Assembled air cap: air cap
(8a), retaining ring (8b), tip
guard, and seals.
Holds the spray tip (7) and
completes the atomization
of the paint tails. See Air
Cap Selection Guide,
page 54.
Attaches the air cap
assembly to the gun. High
pressure gun retaining rings
include a tip guard to keep
body parts away from the
spray tip.
Activates the spray gun.
1/4-18 npsm for fluid supply
hose.
1/4-18 npsm (R 1/4-19) inlet
for the gun air supply hose.
Compatible with npsm and
bsp female swivel
connectors.
Adjusts fan pattern shape
and width.
Improves gun
maneuverability. Included
with select models. See
Models, page 3.
Purpose
3A8099A