Air Cap Selection Guide - Graco PerformAA 15 Instructions - Parts Manual

Air Cap Selection Guide

Air Cap Selection Guide
To reduce the risk of injury, follow the Pressure
Relief Procedure, page 15, before removing or
installing a tip and/or air cap.
Part No. Color
2GF042 PTFE Nickel
2WL042
Black
2WB042 Blue
2LV042 Silver
2HV042 Blue Grey
2QD042 Green
2TC042 PTFE Nickel
2AL042 Black
54
Description
General Finishing (GF)
Wood Lacquer (WL)
Waterborne (WB)
Low Viscosity (LV)
High Viscosity (HV)
Quick Drying (QD)
Top Coat (TC)
Airless (AL)
Air caps are versatile, and more than one air cap can
meet your finishing requirements. Select an air cap
based on coating properties, finishing requirements, and
operator preference.
Optimal Use Recommendations
Atomizes tails at lower pressures.
Spray wood finishing top coats and
lacquer.
Break up the waterborne fluid stream for
even wet film build with waterborne
materials.
Promote dispersion of low viscosity
materials.
Build wet film with high solids materials. 2HV044
Maintain transfer efficiency and
minimize air bubbles with quick drying
materials.
Spray wood finishing top coats
Airless spray application.
HVLP
Verification Kit
2GF044
2WL044
2WB044
2LV044
2QD044
2TC044
---
3A8099A