Night Owl DP2 Series User Manual page 55

3. Select one of the four mask profiles available and click EDIT to modify the setting.
4. For FUNCTION, select ON to enable the privacy mask function.
5. Click COLOR FOR MASK to select the color for the privacy mask.
6. Click TRANSPARENCY to select the transparency for your privacy mask. The options
are: 0%, 25%, 50%, and 100%. When 100% is chosen, no color is shown but only the
mosaic effect for the mask area.
7. For MASK AREA click SETUP to enter the area selection page.
Support.NightOwlSP.com
51