Night Owl DP2 Series User Manual page 34

Adjust the Video Quality Settings
NOTE: These are advanced settings. Night Owl STRONGLY recommends that you keep
these default settings as is.
1. Select MENU > RECORD. From the VIDEO SOURCE CONFIG screen, you can:
Callout
A
B
C
D
E
F
2. Click APPLY at the bottom of the screen when finished.
30
Function Description
Click the IMAGE SIZE dropdown to select the image size for each
IMAGE SIZE
channel (camera). The choices are CIF, FRAME, and 960H.
QUALITY Click the QUALITY dropdown to select the video quality for each
channel. The higher the value, the better the image quality. The
choices are NORMAL, HIGH, BEST, and SUPER BEST.
Click the I.P.S. dropdown to set the image per second. The higher
I.P.S.
the value, the smoother the video. The choices are 1.56, 3.12,
6.25, and 12.5.
Click the BITRATE (kbps) field to enter how much data to process
BITRATE
per unit of time, for each channel. The higher the value, the
better the video quality.
BITRATE The BITRATE CONTROL field shows the upper bit rate limit for
CONTROL the selected channel. For VBR, when the bit rate of the camera
exceeds the value set, the video fluency may be affected. For
CBR, when the bit rate of the camera exceeds the value set, the
image quality may be affected.
The G.O.V. (Group of VOPs) field shows the length of G.O.V. The
G.O.V.
greater the value, the poorer the image quality.
DP2 / DP8 Series User's Manual