Back Up Or Restore Current Dvr Configuration, And Restore Factory Defaults - Night Owl DP2 Series User Manual

Back Up or Restore Current DVR Configuration, and Restore Factory
Defaults
Click MENU > MAINTAIN > SYSTEM. From the SYSTEM screen, you can perform the
following actions:
Back Up or Restore DVR Configurations
To save the DVR's current configurations for later use:
1. Insert a compatible USB flash drive into the USB port on the back of the DVR.
2. Click SUBMIT in the BACKUP CONFIG field to copy the current DVR configurations to a
file "System. bin" and save to your USB flash drive.
To restore the DVR configurations:
1. Insert the USB flash drive with the file "System.bin" into the USB port.
2. Click SUBMIT in the RESTORE CONFIG field.
Reset the DVR to Factory Defaults
IMPORTANT: If you complete this procedure, you will lose all modified changes and settings
To reset the DVR to factory default:
1. Click SUBMIT in the RESET DEFAULT field to reset all settings or partial settings to their
factory default values.
2. Select YES to confirm or NO to cancel. The system reboots after reset.
40
that you made, as well as any saved recordings.
DP2 / DP8 Series User's Manual