Night Owl DP2 Series User Manual page 37

2. Click the EDIT button
the CHANNEL window that appears, you can perform the following actions:
Function
TIMELAPSE
MOTION
DETECTION
HUMAN
DETECTION
FACE DETECTION
3. Click APPLY when finished.
4. Click to enable PUSH for each channel. This feature is disabled by default. When enabled,
the DVR sends push notifications to your Night Owl Protect App when triggered by an
event.
NOTE: To receive push notifications, the DVR MUST be connected to the Internet and
added to your Night Owl Protect account.
Support.NightOwlSP.com
for a specific channel in the RECORDING BY section. From
Description
Select TIMELAPSE to enable recording by timelapse. This is the default
setting for all channels. Timelapse recordings are set at a reduced quality in
order to take up less space on the DVR. The DVR records 24/7 at a reduced
image quality so that you do not miss any events. When motion is detected,
image quality increases.
Select to enable MOTION DETECTION. When selected, the DVR records at
full frame rate when motion (pixel change) is detected.
Select to enable HUMAN DETECTION. When selected, the DVR will record at
full frame rate (high quality) when human motion is detected by one of the
cameras.
Select to enable FACE DETECTION. When selected, the DVR will capture a
person's face when they are up to 10 ft. away from a camera.
33