Night Owl DP2 Series User Manual page 19

3. Insert the screw anchors. Line up the camera base holes with the screw anchors, insert
the screws through the base, and tighten to secure the camera in place. Ensure you
feed the camera wire through the indent in the base as indicated by the green star in the
following illustration.
Add Additional Cameras
You can add additional cameras to your system at any time by following steps 6 - 9 in
Step 3 – Connect Your System and repeating the steps in this section.
Night Owl's DP2 / DP8 Series DVRs are compatible with the following cameras:
CM-DP2L-BU
CM-TA2L-BU
CM-C2OXL-BU
CM-DP2BK-B
Congratulations
You are ready to start using your system! Refer to the View Live Videos and Detected
Events chapter of this manual for more information on how Night Owl works and how to
utilize all of its monitoring features.
Support.NightOwlSP.com
DP2
CM-C20XL-BU
CM-TA2L-BU
CM-DP2L-B
CM-DP2BK-B
DP8
CM-C50XL-BU
CM-TA5L-BU
CM-C80XL-BU
CM-DP8L-B
15