Part 5: Factory Preset Values; Figure 3.10 Flow Chart For Display Color Selection - Omega i Series User Manual

PART 5
FACTORY PRESET VALUES
Table 5.1 Factory Preset Values
MENU ITEMS
Set Point 1 (SP1)
Set Point 2 (SP2)
Input:
Input Type (INPT)
Reading Configuration (RDG):
Decimal Point (DEC.P)
Temperature unit (TEMP)
Filter value (FLTR)
Alarm 1:
Alarm 1 (ALR1)
Absolute/Deviation (ABSO/DEV)
Latch/Unlatch (LTCH/UNLT)
Active (ACTV)
Alarm 1 At Power On (A.P.ON)
Alarm 1 Low (ALR.L)
Alarm 1 High (ALR.H)
Alarm 2:
Alarm 2 (ALR2)
Absolute/Deviation (ABSO/DEV)
Latch/Unlatch (LTCH/UNLT)
Active (ACTV)
Alarm 2 Low (ALR.L)
Alarm 2 High (ALR.H)
Reading Adjust Value (R.ADJ)
Sepoint Deviation (SP.dV)
ID:
ID Value
Full ID (FULL)
Set Point ID (ID.SP)
Communication Parameters: (not available)
Display Color (COLR):
Normal Color (N.CLR)
Alarm 1 Color (1.CLR)
Alarm 2 Color (2.CLR)
FACTORY PRESET VALUES NOTES
000.0
000.0
TC, type K
FFF.F
°F
0004
Enable (ENBL)
Absolute (ABSO)
Unlatch (UNLT)
Below (BELO)
Enable (ENBL)
32.00
000.0
Disable (DSBL)
Absolute (ABSO)
Unlatch (UNLT)
Above (ABOV)
000.0
212.0
000.0
Disabled
0000
Disable (DSBL)
Disable (DSBL)
Green (GRN)
Amber (AMBR)
Red (RED)
39
Alarm 1 only