Factory Default Values - Omega DPF700 User Manual

12
F
ACTORY
S1-1 Closed
S1-2 Open
S1-3 Open
S1-4 Closed
S1-5 Open
S1-6 Open
S1-7 Open
S1-8 Open
S1-9 Open
S1-10 Open
S2-C Installed
S3-A Installed
S4-A Installed
S5-B Installed
64
D
EFAULT
Table 12-1. Factory Default Values
Excitation output is set to 5.0 V.
Excitation output is set to 5.0 V.
High hysteresis = 1.5 V.
Threshold is shifted to positive.
No low pass filter.
No pull-down resistor.
243K pull-up to +excitation.
Trigger edge = Negative (high to low transition).
No signal is internally connected to the input.
Twice the line frequency/blank is not grounded.
An LO
Only " " and "
Enables front-panel buttons.
Enables RECALL buttons.
Selects standard relay option (SETPT HI OUTPUT)
V
ALUES
An HI
" are locked-out.