ENTER READING CONFIGURATION MENU:
Press a
Press d
Press a
Press d
DECIMAL POINT SUBMENU:
Press d
Press b
Press d
Decimal Point for Process Input Type is passive.
1) Press a, if necessary until CNFG prompt appears.
2) Display advances to INPT Input Menu.
3) Press and release RDG Reading Configuration Menu.
4) Display advances to DEC Decimal Point.
5) Display flashes previous selection for Decimal location.
6) Scroll though the available selections and choose Decimal
location: FFFF or FFF.F (also FF.FF and F.FFF — if PROC
Process type was selected in the Input Type Menu).
7) Display shows STRD stored message momentarily and then
advances to TEMP Temperature Unit.
20