Locking Control Keys; Turning The Projector Off - BenQ W7000 User Manual

The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do
not affect the projection settings, operation, or performance.
• Menu Display Time in the System Setup > Menu Settings menu sets the length of time the
OSD will remain active after your last key press. Use
• Menu Position in the System Setup > Menu Settings menu sets the OSD position in five
locations. Use /
• Language in the System Setup menu sets your familiar language for the On-Screen (OSD) Menus.
See "Using the menus" on page 22
• Splash Screen in the System Setup menu sets a preferred logo screen to be displayed during
projector start-up.

Locking control keys

With the control keys on the remote control and projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example). When Key Lock is on, no control
keys on the remote control and projector will operate except POWER ON/OFF and
To lock the keys:
1. Press MENU and then press
menu is highlighted.
2. Press to highlight Key Lock, and press
warning message appears. Select Yes and press ENTER. The control
keys lock.
To unlock the keys, press and hold
control for 3 seconds.

Turning the projector off

To turn the projector off, press POWER OFF on the remote
control to turn the projector off directly. Or you can press
the projector and a warning message appears. Press
• The Power indicator light flashes orange and the fans run for
about two minutes to cool the lamp. The projector will not
respond to any commands until the cooling process is complete.
• Then, the Power indicator light is a steady orange once the
cooling process has finished and fans stop.
• If the projector will not be used for an extended period, unplug
the power cable from the power outlet.
• To protect the lamp, the projector will not respond to any
commands during the cooling process.
Actual lamp life may vary due to different environmental conditions
and usage.
to select a preferred position.
for details.
/ until the Advanced Setup
on the projector or remote
/ to select a suitable time length.
/ to select On. A
on
I
I
again.
I
I
Connecting with video equipment
.
Advanced Setup
Lamp Settings
HDMI Settings
Baud Rate
Test Pattern
High Altitude Mode
Password
Key Lock
Reset All Settings
ISF
S-Video
Power Off
Press button again to power
off.
Press any other key to cancel
115200
Off
Off
Back
37