Advanced Picture Quality Controls - BenQ W7000 User Manual

The higher the value, the more reddish the flesh tones in the picture become. The lower the value, the
more greenish the flesh tones in the picture become.
The Brightness, Color, Contrast, Tint functions can also be accessible
by pressing BRIGHTNESS, COLOR, CONTRAST, TINT on the
remote control to display the adjustment bar and then you can press
to adjust the values.

Advanced picture quality controls

There are more advanced functions in the Picture -- Advanced menu to be adjusted to your
preference. To save the settings, just press MENU to leave the OSD menu.
Setting Black Level
Highlight Black Level and press
control to select 0 IRE or 7.5 IRE.
The grayscale video signal is measured in IRE units. In some areas which
use NTSC TV standard, the grayscale is measured from 7.5 IRE (black) to
100 IRE (white); however, in other areas where PAL equipment or
Japanese NTSC standards are used, the grayscale is measured from 0 IRE
(black) to 100 IRE (white). We suggest that you check the input source
to see if it is with 0 IRE or 7.5 IRE, then select accordingly.
Controlling image clarity
You may have static or noisy projected pictures.
To achieve better picture clarity:
1. Highlight Clarity Control and press ENTER on the projector or
remote control to display the Clarity Control page.
2. Press / to select the item you want to adjust and press
set the desired value.
• Noise Reduction: Reduces electrical image noise caused by
different media players. The higher the setting, the less the noise.
• Detail Enhancement: Sharpens the image. The higher the
setting, the more details the image reveals.
Selecting a color temperature
Highlight Color Temperature and select a preferred setting by pressing
/ on the projector or remote control.
There are several color temperature settings available.
1. Lamp Native: With the lamp's original color temperature and higher
brightness. This setting is suitable for environments where high
brightness is required, such as projecting pictures in well lit rooms.
2. Warm: Makes pictures appear reddish white.
3. Normal: Maintains normal colorings for white.
4. Cool: Makes pictures appear bluish white.
/ on the projector or remote
*
/
Picture -- Advanced
Black Level
Clarity Control
Color Temperature
Color Temperature Fine Tuning
Gamma Selection
Brilliant Color
Color Management
Film Mode
3D Comb Filter
Dynamic Black
S-Video
Picture -- Advanced
Black Level
Clarity Control
Color Temperature
Color Temperature Fine Tuning
Gamma Selection
Brilliant Color
Color Management
/ to
Film Mode
3D Comb Filter
Dynamic Black
S-Video
Clarity Control
Noise Reduction
Detail Enhancement
Picture -- Advanced
Black Level
Clarity Control
Color Temperature
Color Temperature Fine Tuning
Gamma Selection
Brilliant Color
Color Management
Film Mode
3D Comb Filter
Dynamic Black
S-Video
Connecting with video equipment
0 IRE
Normal
2.4
On
Off
Off
On
Back
0 IRE
ENTER
Normal
2.4
On
Off
Off
On
Back
0
3
Back
0 IRE
Normal
2.4
On
Off
Off
On
Back
29