Shifting The Projection Lens - BenQ W7000 User Manual

Shifting the projection lens

The lens shift control provides flexibility for installing your projector. It allows the projector to be
positioned off the center of the screen.
The lens shift is expressed as a percentage of the projected image height or width. It is measured as an
offset from the projected image's vertical or horizontal center. You can use the lever to shift the
projection lens in any direction within the allowable range depending on your desired image position.
To use the lens shift lever:
1. Release the lever by turning it counterclockwise.
2. Move the lever to adjust the projected image position.
3. Lock the lever by turning it clockwise.
• When the screen position is fixed
Screen
• When the projector position is fixed
• Please do not over-tighten the lever.
• Lens shift adjustment will not result in a degraded picture quality. In the unlikely event that the image
distortion is produced, see
16 Positioning your projector
Projector
100%
25%
-25%
-100%
41.3%
"Adjusting the projected image" on page 25
Range of
placement
Center of lens
41.3%
for details.