Picture Menu - BenQ MP612C User Manual

Picture menu

Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
Picture Mode
(PC: Dynamic;
YPbPr/ S-Video/
Video:
Standard)
Reference
Mode
Brightness
Contrast
Color
(0)
Tint
(0)
Sharpness
(15)
Brilliant
Color
(B2)
Color
Temperature
3D Color
Management
Save
Settings
46 Operation
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
mode" on page 33 for details.
Selects an picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the same
page below.
Adjusts the brightness of the image.
See "1. Adjusting brightness" on page 34
Adjusts the degree of difference between dark and light in the image.
See "2. Adjusting contrast" on page 34
Adjusts the color saturation level -- the amount of each color in a video
image. Lower setting produces less saturated colors; setting to the
minimum value makes the image black and white. If the setting is too
high, colors on the image will be overpowering, which makes the image
unrealistic.
Adjusts the red and green color tones of the image. The higher the value,
the more greenish the image becomes. The lower the value, the more
reddish the image becomes.
Adjusts the image to make it look sharper or softer.
Adjusts white peaking while maintaining correct color presentation.
When Brillian Color is set as B1, the color temperature adjustment
will not function.
There are four color temperature settings are available.
See "3. Selecting a color temperature" on page 34
See "4. 3D Color Management" on page 35
Saves the settings made for User 1 or 2 mode.
"Selecting a picture
for details.
for details.
for details.
for details.