Correcting Keystone; Magnifying And Searching For Details On The Projected Picture - BenQ MP612C User Manual

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually
correct it following ONE of these steps.
1. Press
the projector or remote control to display
the status bar labelled Keystone. Press
to correct keystoning at the top of the
image. Press
the bottom of the image.
2. Press Menu/exit on the projector or remote
control. Go to DISPLAY
adjust the values by pressing
on the projector or remote control.
For example,
Keystone
Keystone
Magnifying and searching for details on the
projected picture
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
• Using the remote control
1. Press D. ZOOM + to display the Zoom bar. The center of the
picture will be magnified when the key is pressed again. Press
the key repeatedly until the picture size is suitable for your
need.
2. Use the directional arrows ( ,
or remote control to navigate the picture.
The picture can only be navigated after the picture is magnified. You
can further magnify the picture while searching for details.
or on the control panel of
to correct keystoning at
> Keystone
• Press
control.
• Press
control when you are in the Picture >
Keystone menu.
0
• Press
control.
• Press
control when you are in the Picture >
Keystone menu.
0
and
or
on the projector or remote
on the projector or remote
on the projector or remote
on the projector or remote
, , ) on the projector
Keystone
-6
Keystone
+6
Operation 31