Setting The Presentation Timer - BenQ MP612C User Manual

For example, if you select Red and set its value at 0, only the saturation of pure red will
be affected.
6. Press
or Right. The contrast level of the primary color you select will be affected. Every
adjustment made will reflect to the image immediately.
7. Repeat steps 3 to 6 for other color adjustments.
8. Make sure you have made all of the desired adjustments.
9. Press Menu/exit to exit and save the settings.
5. Other adjustments
You can find other image quality fine-tune selections in the PICTURE menu as well. See
"Picture menu" on page 46

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen
to help you achieve better time management when giving
presentations. Follow these steps to utilize this function:
1. Press Timer Set up on the remote control or go to the SYSTEM
SETUP: Basic > Presentation Timer menu and press Mode/
enter to display the Presentation Timer page.
Presentation Timer
Timer period
Timer display
Timer position
Timer counting direction
Sound reminder
2. Press
Left/
increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press
up on the screen by press
Selection
Always
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
36 Operation
to highlight Gain and adjust its values to your preference by pressing
for details.
On
Down to highlight Timer Period and decide the timer period by pressing
Right. The length of time can be set from 1 to 5 minutes in 1-minute
Down to highlight Display Timer and choose if you want the timer to show
ing
Description
Displays the timer on screen throughout the presentation time.
Hides the timer throughout the presentation time.
Always
Top-left
Count down
Off
Off
MENU
Left/ Right
.
Back
Left