Table of Contents
Advertisement
Picture menu
Submenu
Picture Mode
User Mode
Management
Brightness
36
Menu Functions
Selects a preset picture mode to suit your operating environment and input signal
picture type.
The preset picture modes are described as below:
Bright: Maximizes the brightness of the projected image. This mode is suitable
•
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
•
Cinema: With well-balanced color saturation and contrast with a low
brightness level, this is most suitable for enjoying movies in a totally dark
environment (as you would find in a commercial cinema).
•
Standard: Being slightly brighter than Cinema mode, it is suitable for use in
rooms where there is a small amount of ambient light.
•
3D: It is optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
•
User 1/User 2: Recalls the customized settings. See
for more details.
The function is accessible through the remote control.
The functions are only available when Picture Mode is set to User 1
•
Load Settings From
Allows you to manually adjust a preset picture mode and make it an available option
on the picture mode list.
1. Go to the Picture > Picture Mode menu, select User 1 or User 2.
to select User Mode Management.
2. Press
3. On the User Mode Management window, select Load Settings From and
press OK.
4. Press
to select a picture mode that is close to your need.
5. When done, press OK and BACK to return to the Picture menu.
6. Press
to select other submenus you want to make changes and use
adjust the values. The adjustments define the selected user mode.
Rename User Mode
•
Selects to rename the customized picture modes (User 1 or User 2).
1. Go to the Picture > Picture Mode menu, select User 1 or User 2.
2. Press
to select User Mode Management.
3.
On the User Mode Management window, select Rename User Mode and
press OK.
4. On the Rename User Mode window, use
characters for the selected mode.
5. When done, press OK and BACK to exit.
Adjusts the brightness of the picture. When adjusting this control, the black areas of
the picture appear just as black and details in the dark areas are visible.
30
The function is accessible through the remote control.
Functions and Descriptions
The higher the value, the brighter the
picture, while the lower the value, the
darker the picture.
50
70
User Mode Management
/ / /
to select desired
or
.
User 2
/
to
Advertisement
Table of Contents
