Display menu
FUNCTION
(default setting/
value)
Wall Color
(Off)
Aspect Ratio
(Auto)
Keystone
(0)
Position
(0)
Phase
(depends on the
selected input
source)
H. Size
(depends on the
selected input
source)
Digital Zoom
(100%)
DESCRIPTION
(default setting/value)
Correct the projected picture's color when the projection surface is not
white.
There are four options to set the image's aspect ratio depending on your
input signal source.
See
"Selecting a picture mode" on page 33
Corrects any keystoning of the image. See
31
for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow buttons. The values shown on the lower
position of the page change with every button press you made until they
reach their maximum or minimum.
Adjusts the clock phase to reduce image
distortion.
Adjusts the horizontal width of the image.
Magnifies or reduces the projected image.
After the image is magnified, you can press Mode/enter to activate the
Pan functionality for searching the details of the projected image by
using the directional arrow buttons on the projector or remote control.
See
"Magnifying and searching for details on the projected picture" on
page 31
for details.
for details.
"Correcting keystone" on page
Operation
45