Controls And Functions; Projector - BenQ MP612C User Manual

Controls and functions

Projector

1
2
1. Focus ring
Adjusts the focus of the projected image.
See "Fine-tuning the image size and
clarity" on page 30
2. Zoom ring
Adjusts the size of the image. See
tuning the image size and clarity" on page
30 for details.
3. Power indicator light
Lights up or flashes when the projector is
under operation. See
56 for details.
4. MENU/exit
Turns on the On-Screen Display (OSD)
menu.
Goes back to previous OSD menu, exits
and saves menu settings.
See "Using the menus" on page 44
details.
5. I Power
I
Toggles the projector on or off.
See "Start up" on page 26
down the projector" on page 40
details.
12 Introduction
3
4
5
6
7
for details.
"Fine-
"Indicators" on page
for
and "Shutting
for
10
11
8
12
9
13
14
6. BLANK
Used to hide the screen image. To restore
the image, press any button on the
projector or remote control. See
the image" on page 38
7. Left/
Starts the FAQ function. See
down the projector" on page 40
details.
8. Keystone/Arrow buttons (
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 31
details.
9. Right/
Activates panel key lock. See
Lock" on page 48
When the On-Screen Display (OSD)
menu is activated, the #7 to #9 buttons are
used as directional arrows to select the
desired menu items and to make
adjustments. See
page 44 for details.
8
"Hiding
for details.
"Shutting
for
/ Up,
for
"Panel Key
for details.
"Using the menus" on
/