Remote Control - BenQ MP612C User Manual

Remote control

1
2
3
4
5
1. I Power
I
Toggles the projector on or off.
See "Start up" on page 26
down the projector" on page 40
2. Freeze
Freezes the projected image. See
the image" on page 38
3. Left/
Starts the FAQ function. See
FAQ function" on page 39
4. BLANK
Used to hide the screen image. To restore
the image, press any button on the
projector or remote control. See
the image" on page 38
5. DIGITAL ZOOM buttons (+, -)
Magnifies or reduces the projected image
size. See "Magnifying and searching for
details on the projected picture" on page
31 for details.
6. MENU/exit
Turns on the On-Screen Display (OSD)
menu.
Goes back to previous OSD menu, exits
and saves menu settings.
14 Introduction
6
7
8
9
10
11
7
12
13
and "Shutting
for details.
"Freezing
for details.
"Utilizing
for details.
"Hiding
for details.
See "Using the menus" on page 44
details.
7. Keystone/Arrow buttons (
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 31
details.
8. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 30
details.
9. Right/
Activates panel key lock. See
Lock" on page 48
When the On-Screen Display (OSD)
menu is activated, the #3, #7 and #9
buttons are used as directional arrows to
select the desired menu items and to
make adjustments. See
on page 44 for details.
10. SOURCE
Sequentially selects the input signal D-
Sub/Comp. (Component Video), Video,
or S-Video. See
on page 29 for details.
11. MODE/enter
Depending upon which input signal is
selected, selects an available picture setup
mode. See "Selecting a picture mode" on
page 33 for details.
Enacts the selected On-Screen Display
(OSD) menu item. See
on page 44 for details.
12. Timer On
Activates or displays an on-screen timer
based on your own timer setting. See
"Setting the presentation timer" on page
36 for details.
13. Timer Setup
Enters presentation timer setting directly.
See "Setting the presentation timer" on
page 36 for details.
for
/ Up,
for
"Panel Key
for details.
"Using the menus"
"Switching input signal"
"Using the menus"
/
for