Table of Contents
Advertisement
Chapter 3 Hardware parts & functions
Control Panel (continued)
6. Zoom mode lamp (steady light) lights up when the zoom magnifi-
cation mode is selected.
When lit, you can set a zoom magnification with the
(reduce) button.
7. Preset magnification mode lamp (steady light) lights up when
the Preset Magnification mode is selected.
When lit, magnification is set with the
button.
8. One-to-one (1:1) mode lamp (steady light) lights up when the 1:1
mode is selected. When lit, originals are copied in 1:1 without any
magnification applied.
9. Print quantity/Magnification ratio window displays the number
of copies and the copy magnification you set.
10. READY indicator lights up green when the copier is ready for
copying. During warm-up or when the copier is not ready for
copying, the orange lamp lights up.
When the copier is in the Power Save mode, the orange lamps
blinks.
11. [START PRINT] button can be pressed to begin copying while
the READY indicator light is green. If you press this button during
warm up, the copier returns to the copying-ready state, and then
automatically starts to copy.
12. [STOP/CLEAR] button can be pressed during continuous
copying to cancel the number of copies being made.
(enlarge) or
(enlarge) or
(reduce)
3-5
Advertisement
Table of Contents
