Fm-Quadro; Fm-Quadro For Bridge Network-Capable Devices - Cisco FM PONTE-50 Installation And Configuration Manual

Figure 22. Configurator GUI (Ping Softdog dialog)
2. To set up a constant ping to one or more IP addresses, do the
following steps:
1. Enter the IP address in the field to the left of the Add IP
2. Click the Add IP button.
3. To delete an IP address from the IP list, click the red
3. To automatically reboot the unit if connectivity is lost between the
unit and any IP address, do the following steps:
1. Check the Reboot: check-box.
2. Click the Save button.

7.5.2. FM-QUADRO

FM-QUADRO for bridge network-capable devices

The PONTE FMQuadro™ window
dynamic information display that shows important information about the
two Cisco FM Ponte kit bridge devices and the wireless link between
them, and allows you to diagnose problems with the wireless link.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
button.
• The IP Address will be added to the IP list.
• There is no limit on the number of IP addresses
that can be entered.
cross to the right of the IP address listing.
(Figure 23 (page 53)) contains a
Page 52 of 132