Cisco FM PONTE-50 Installation And Configuration Manual page 43

netmask and/or default gateway in the relevant fields
(page 43)).
Figure 14. MeshWizard (Unit Address Configuration window)
7. Click the Next button.
• The radio frequency window will be shown
(page
Figure 15. MeshWizard (Radio frequency window)
8. Select the frequency at which the unit must operate from the
Radio Frequency (MHz) drop down list.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
43)).
(Figure 14
(Figure 15
Page 43 of 132