Brother Z-8550B Instruction Manual page 86

No. Setting
range
304 0, 1
305 0, 1
306 0, 1
310 OFF, 30 to
600
(seconds)
311 OFF, ON
Sewing program settings (400 to 499)
No. Setting
range
400 ON/OFF
401 ON/OFF
Default value Setting
unit
0 1
1 1
0 1
180 30
OFF
－
Default value Setting
unit
OFF －
ON
－
Setting details
1: Program individual functions
Program common function / program individual function
settings
Correction sewing
0: Program common functions
1: Program individual functions
Program common function / program individual function
settings
AUTO/ auto thread trimming
0: Program common functions
1: Program individual functions
Program common function / program individual function
settings
Slow start
0: Program common functions
1: Program individual functions
Automatic panel lock ON standby time
OFF: Automatic panel lock is disabled
30 to 600: Panel open time before panel lock turns on (sec)
The standby time is only counted at the home screen.
If any other screen is displayed, the panel lock does not
operate.
Panel auto lock when power is turned on
OFF: Disabled
ON : Enabled
Setting details
Stopping and sewing speed during start backtacking
ON: When the treadle is returned to the neutral position, start
backtacking can be stopped before it is finished, and the
speed during start backtacking becomes the speed
corresponding to the treadle depression amount (low speed -
start backtacking speed)
OFF: When the treadle is returned to the neutral position,
start backtacking ends, sewing stops and the sewing speed
becomes the start backtacking speed (constant)
Feed direction when sewing machine motor is stopped
immediately after start backtacking is complete
OFF: Sewing machine motor stops after start backtacking is
complete
If memory switch No. 400 is set to "OFF", operation
occurs when the treadle is depressed slightly.
73