Replacing Parts; Points To Note When Replacing Parts - Brother Z-8550B Instruction Manual

8

Replacing parts

Points to note when replacing parts

• Turn off the power switch and disconnect the power cord before carrying out these operations. The
machine may operate if the treadle is depressed by mistake, which could result in injury.
• When removing the needle plate, auxiliary needle plate and knife unit, use a screwdriver that
matches the size of the screw heads. If a screwdriver that does not match the size of the screw
heads is used, it may damage the screw heads and result in injury to the operator or damage to the
articles being sewn.
• Replacement of parts should only be carried out by a qualified technician.
• Use only the proper replacement parts as specified by Brother.
Related Information
• Replacing the fixed knife and movable knife on page 98
• Replacing the stopper on page 99
• Limiting the zigzag width (additional function using memory switches) on page 100
• Changing the feed amount to long stitch specifications on page 100
• Changing the maximum feed amount on page 101
CAUTION
97