Brother Z-8550B Instruction Manual page 8

(1)
(2)
1 Moving parts may cause injury.
2 Operate with safety devices installed.
3 Turn off the power before carrying out
operations such as threading, changing the
needle, bobbin, knives or hook, cleaning and
adjusting.
(3)
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
(4)
Direction of operation
(5)
If the hand switch is pressed by mistake when
using the correction sewing function, the needle
will move in a zigzag motion while the machine is
operating, and injury may result.
(6)
Do not touch the thread take-up or the knife. If
they are touched, injury may result.
Safety devices:
1
(A) Finger guard
(B) Thread take-up guard cover
(C) Motor cover
(D) Zigzag motor cover
(7)
1
(8)
High temperature warning indication
(9)
Be careful not to get your hands caught when
returning the machine head to its original position
after it has been tilted.
(10)
Spare ground
vii