Brother Z-8550B Instruction Manual page 66

Thread wiper
Related Models:
Z-8560B
Thread wiping operation can be set.
Correction sewing
Correction sewing operation can be set.
AUTO
Automatic sewing and thread trimming operations can be set. However, they can only be set in conjunction with
continuous backtack sewing and fixed stitch sewing.
Thread trimming operation is carried out when the treadle is depressed
backward.
Thread trimming operation by depressing the treadle backward is locked
(disabled).
Thread wiping operation is disabled after thread trimming.
Thread wiping operation is enabled after thread trimming.
If thread trimming operation is disabled, thread wiping operation will also be
disabled.
Correction sewing operation using the hand switch is disabled.
Operating the hand switch may result in an operation other than correction
sewing being carried out.
The operation mode can be changed to a different mode from correction
sewing. For more detailed information"Hand switch".
Correction sewing operation using the hand switch is enabled.
If the sewing machine is stopped, sewing will be carried out at slow speed while
the hand switch is being pressed.
The operation mode can be changed to correction sewing. For more detailed
information"Hand switch".
Automatic sewing is not carried out, and sewing stops when the treadle is
returned to the neutral position.
Sewing is carried out automatically for the number of stitches which have been
set (start and end backtacking and fixed stitch sewing) simply by depressing the
treadle once.
After sewing is complete, depress the treadle backward to carry out thread
trimming.
Setting details
Setting details
Setting details
Setting details
53