Brother Z-8550B Instruction Manual page 115

7
Without lowering the reverse lever (9), move the
stopper (5) up until it touches F-regulator
connecting rod (10), and then tighten the screw
(3).
8
With the reverse lever (9) lowered all the way,
move the stopper (6) down until it touches the F-
regulator connecting rod (10), and then tighten the
screw (4).
9
With the reverse lever (9) lowered all the way (with
the plunger (11) of the quick reverse solenoid
moved to its highest position), touch the quick
reverse solenoid (2) against section (A) of the
plunger (11), and then tighten the two screws (1).
(Z-8550B-A31/Z-8560B)
Related Information
• Adjusting the stitch length on page 21
• Backtack sewing on page 22
• Points to note when replacing parts on page 97
• Changing the feed amount to long stitch
specifications on page 100
102