Adding Grease (When The Grease Up Warning Screen Is Displayed) - Brother Z-8550B Instruction Manual

Adding grease (when the grease up warning screen is displayed)

If the time for adding grease has been reached when the power switch is turned on, the warning buzzer sounds five
times (1 second on/1 second off), and the panel display changes to the grease up warning screen. The sewing
machine will not operate at this time, even if the treadle is depressed.
To continue sewing temporarily without applying grease
1
Press .
The panel display will change to the home screen and sewing will be possible when the treadle is depressed.
CAUTION
• The grease up warning screen will be displayed each time the power is turned on until you apply grease and
reset the notification.
• If you continue to use the sewing machine after the grease up warning screen is displayed without applying
grease (or without carrying out the reset procedure), "E 100" will appear after a certain period of time and the
sewing machine will be forcibly prevented from operating for safety reasons.
If this happens, apply grease and carry out the reset procedure.
• If you continue to use the sewing machine after carrying out the reset procedure but without applying
grease, problems with the sewing machine may result.
Applying grease
NOTE
Use Brother-specified "Grease unit (SB6659-101)".
Using the tube
1
Make a hole in the tube and attach the nozzle according to the instructions shown in the illustration.
93