Adjusting The Position Of The Bobbin Case Holder Position Bracket - Brother Z-8550B Instruction Manual

Adjusting the position of the bobbin case holder position bracket

Adjust so that the end of the bobbin case holder position bracket (1) is 0 to 0.5 mm back from end (A) of the inner
rotary hook (2).
The end of the bobbin case holder position bracket (1) must never extend to the right of end (A) of the inner
rotary hook (2).
1
Loosen the screw (3) and adjust the position of the
bobbin case holder position bracket (1).
2
Securely tighten the screw (3).
Related Information
• Points to note when making adjustments on page 103
114