Honda HHT25S Manual page 61

RECOIL STARTER / FUEL TANK
REASSEMBLY

• Wear gloves and eye protection.
• During disassembly, take care not to allow the return spring to
come out.
1. Insert the hook on the outer side of the spring into the groove
inside the starter reel. Carefully wind the recoil starter spring
inside the starter reel.
2. Pass the starter rope through the starter reel, and tie the rope
so that it can be untied easily by pulling it as shown.
3. Wind the starter rope around the recoil starter reel in the
direction of the arrow.
4. Hook the starter rope into the cutout of the starter reel.
5. Install the starter reel on the starter case so that the spring
inner hook is hooked to the case tab.
6. Hold the starter case and rotate the starter reel three turns in
the direction of the arrow for preliminary winding.
6-6
CAUTION
RECOIL STARTER
SPRING
RECOIL STARTER REEL
SLIPKNOT
CUTOUT
RECOIL
STARTER ROPE
RECOIL STARTER REEL
HOOK
TAB
RECOIL STARTER CASE
HHT25S•HHT35S
HOOK
GROOVE
RECOIL
STARTER
REEL