Honda HHT25S Manual page 52

HHT25S•HHT35S
4. HHT35S CARBURETOR
REMOVAL/INSTALLATION

WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
NOTICE
If these parts are left out or not attached, dirt will enter the intake
system and damage the engine.
1. Loosen the 5 mm top cover bolt, then remove the cover.
2. Remove the air cleaner
3. Drain the carburetor by pushing the primer bulb.
CARBURETOR ASSEMBLY
DISASSEMBLY/REASSEMBLY: P. 5-3, 5-4
DISASSEMBLY/REASSEMBLY:
ADJUSTMENT: ADJUSTMENT: P. 3-9
P. 5-10
12.3 x 2.4 mm O-RING
P. 3-3.
CARBURETOR GASKET
Do not reuse.
P. 5-8
PRIMER PUMP
FUEL RETURN TUBE (clear)
AIR CLEANER / CARBURETOR
BREATHER TUBE
INSTALLATION:
Note the installation direction.
AIR CLEANER
CASE SIDE
LONG
TUBE CLIP
FUEL TUBE (black)
REASSEMBLY:
Do not interchange with
the fuel return tube.
SHORT
CYLINDER
BLOCK
SIDE
5-7