Honda HHT25S Manual page 31

MAINTENANCE
2. ENGINE OIL
LEVEL CHECK
Check the engine oil level before each use. Check the oil with the
engine stopped and the engine on a level surface.
1. Remove the oil filler cap/dipstick and wipe it clean.
2. Insert and remove the dipstick without screwing it into the
filler opening. Check the oil level shown on the dipstick.
3. If the oil level is low, fill to the edge of the oil filler neck with the
recommended oil. To avoid over-filling or under-filling, be sure
the engine is in a level position.
NOTICE
Running the engine with too little or too much oil can cause
engine damage.
4. Screw in the oil filler cap/dipstick securely.
OIL CHANGE
Drain the used oil while the engine is warm. Warm oil drains quickly
and completely.
1. Check that the fuel tank cap is fastened securely.
2. Place a suitable container below the engine to catch the used
oil.
3. Remove the oil filler cap/dipstick.
4. Tilt the engine toward the oil filler cap side and drain the oil into
the container. Allow the used oil to drain completely.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground or
down a drain.

Used engine oil contains substances that have been
identified as carcinogenic.
If repeatedly left in contact with the skin for prolonged
periods, it may cause skin cancer.
Wash your hands thoroughly with soap and water as soon as
possible after contact with used engine oil.
3-2
CAUTION
HHT25S•HHT35S
OIL FILLER CAP/DIPSTICK