Figure 72. Installing the custom GPU I/O brackets and the support brackets
1. Torx screw (2)
3. GPU
5. screw (5)
Next steps
Follow the procedure listed in
Installing the GPU brackets on the GPUs removed from your
system
Prerequisites
1. Follow the safety guidelines listed in
2. Keep the Phillips #1, #2, and the Torx T6 screwdrivers ready.
3. Remove the GPU brackets.
Steps
1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
2. Secure the I/O bracket to the GPU by using the screws.
3. Align the screw holes on the support bracket with the screw holes on the GPU.
4. Secure the support bracket to the GPU by using the screws.
72
PowerEdge C4140 installing and removing system components
After working inside your system
Safety instructions
2. support bracket
4. I/O bracket
on page 24.
on page 23.