Table of Contents
Advertisement
Next steps
Remove the GPU riser cable
board.
Removing a GPU riser cable board
Prerequisites
1. Follow the safety guidelines listed in
Safety instructions
on page 23.
2. Follow the procedure listed in
Before working inside your system
on page 24.
3. Keep the Philips #2 screwdriver ready.
4. Disconnect the power cables connected to the GPU.
5. Remove the GPU from the chassis.
Steps
1. Remove the screws securing the GPU riser cable board to the GPU.
2. Pull the GPU riser cable board to disengage the connector on the GPU riser cable board from the GPU.
3. Remove the GPU riser cable routed through the GPU riser cable clip.
Figure 67. Removing a GPU riser cable board
NOTE:
The procedure to remove the riser cable clip is same for configuration B, C and G.
PowerEdge C4140 installing and removing system components
67
Advertisement
Table of Contents
