New Holland 200 Series Service Manual page 30

(17) HYDRAULIC FLUID TEMPERATURE BAR
GRAPH:
This hydraulic oil temperature bar graph
indicates the relative temperature of the
hydraulic oil from 0 - 110 °C (32 - 230 °F). If
the temperature exceeds 110 °C (230 °F), all
8 graph segments will display, backlighting
will flash, and the audible alarm will sound.
(18) TEXT DISPLAY:
This display will show the following during
normal operation, as selected by the
operator.
• Engine hours: Engine hours will always be
displayed momentarily when the operator
initially sits in the seat. The operator may
choose to leave engine hours on display
continuously or select one of the following.
• Engine RPM
• Engine coolant temperature (degrees F or
C)
• Hydraulic oil temperature (degrees F or C)
• Cycle: If this display option is chosen, the
display will continuously cycle through all
four of the above items
The text display will also help the operator
or technician with information as the SETUP
menu is utilized.
NOTE: To change display mode "on the
go" hold the AUX OVERRIDE (3) until the
current option name is displayed, push the
AUX OVERRIDE button repeatedly until
desired option name is displayed. This
display mode value will continue to be
shown until another selection is made.
INTRODUCTION
47712044 29/04/2014
24
4
93109329A